Description
Crosshead extension
| Referências | Característica | |||
|---|---|---|---|---|
 | RH4800-60 |  | ||
 | RH4800-72 | | ||
 | RT403-2417 | | ||
 | RC400-1310 | |
Crosshead extension
Crosshead extension
They are designed for voltages up to 15 kV and are normally used to replace conductors or insulators. However, they can also be used for voltages up to 34.5 kV, as long as the insulators (RM4805-7) are installed in the clamps.
It is a tool attached under the crosshead so that approximately 3/4 of its length exceeds the crosshead, in order to allow the conductors to pass through its clips.
