Platform
Designed with RITZGLAS® tubes, these platforms provide the electrician with a safe and convenient base from which to carry out work, both contact and remote. They can be quickly mounted on structures, ensuring that the electrician is well positioned vertically and horizontally.
The platforms attach quickly to the structure using two mounting options:
|
Adjustable type
Ideal for jobs that don’t require frequent changes to the platform’s lateral position. It is fixed to the post using the chain tensioner or to the structure using claws.
| Pivot type
Allows the electrician to rotate the mounted platform horizontally by 180° and can be positioned at intermediate angles to the left or right
.
The board is 250 mm wide and made of fiberglass, with a non-slip surface to prevent the electrician from accidentally slipping. The handrail and tripod serve as support and attachment points for the safety belt’s fall arrest device.
Insulating Platform
It includes an insulation of 0.30 m between the board and the pole coupling saddle by means of two RITZGLAS® tubes, Ø 51 mm, which allows the use of insulating platforms in energized installations up to 34.5 kV by the contact and distance method.
|
Rated working capacity: 227 daN (500 lb)
Aerial Platform
It is used for working on energized installations using the remote method.
|
Rated working capacity: 227 daN (500 lb)
Suspension platform
It can be rotated through 180° in relation to the horizontal plane, allowing the electrician to better position the platform without having to dismantle it for further adjustments. It is normally used in structures
where space is limited and it is not possible to install a conventional platform.
|
Nominal working capacity is 181 daN (400 lb) in an aligned position perpendicular to the structure. This capacity reduces to 136 daN (300 lb) when positioned at any different angle.
Aluminum Platform
Used for working on de-energized electrical networks, this platform is made from aluminum sheet, offering a unique combination of strength and lightness. Its surface has a non-slip floor, preventing the electrician from accidentally slipping during use. It also has lifting eyes on the sides.
The fixing saddle and French hand play a crucial role in serving as fixing points and structural support for the platform, contributing to its mechanical performance.
|
Rated working capacity: 136 daN (300 lb).
Platform Saddle
Designed to meet specific situations where the electrician needs a foothold on the pole when the ladder is limited by its height.
Made of aluminum alloy and adjusted to the post by means of a chain tensioner for final tightening.
|
Nominal working capacity: 340 daN (750 lb).
Ladder platform
It allows the electrician to work standing up or sitting down, providing better positioning on the structure.
It consists of a 1.20 m RITZGLAS® ladder and a fiberglass platform with a non-slip surface measuring 250 x 510 mm. When supplied with adjustable hooks, these are used to attach it to the structure. The platform can be folded for easy transportation and storage.
|
Nominal working capacity: 227 daN (500 lb).
