Description
Universal tool.
| Referências | Característica | ||
|---|---|---|---|
 | RC403-0005 | Insulator Hook For handling and lifting insulator strings. Its articulation allows maintaining alignment with the insulator at all times. Also used as support during interventions on energized installations, such as installation of hot sticks or yokes. Approx. weight: 0.30 kg (0.66 lb) | |
 | RC403-0006 | Cotter Pin Positioning Tool Used in disc insulator coupling to insert the cotter pin into its locking position when the eye is oriented opposite to the structure. Approx. weight: 0.35 kg (0.77 lb) | |
 | RM4455-87 | Socket Adjusting Fork Allows positioning of the insulator socket during installation or removal. Also used as an auxiliary tool during the installation of the cradle in “V” string assemblies and for installing tensioning rods. Approx. weight: 0.30 kg (0.66 lb) | |
 | RC403-0126 | Socket Adjusting Fork Similar to the RM4455-87 socket adjusting fork, this tool is designed to handle objects up to Ø 69 mm. Approx. weight: 0.32 kg (0.71 lb) | |
 | RC403-0011 | Spring-Loaded Impact Adapter Due to the impact generated by its coil spring, this tool facilitates the extraction of cotter pins when used in conjunction with cotter pin pullers, especially in confined spaces and adverse conditions. Approx. weight: 0.27 kg (0.60 lb) | |
 | RC403-0175 | Plastic-Coated Socket Adjusting Fork The plastic coating prevents damage to disc insulators or hot sticks during handling. Approx. weight: 0.35 kg (0.77 lb) | |
 | RC403-0177 | Multi-Angle Clamp Designed to hold nuts, fittings, or any other moving parts during intervention. Its wing nut allows pre-adjustment to the desired angle. Approx. weight: 0.88 kg (1.94 lb) | |
 | RC403-0834 | Preformed Tie Applicator Specifically designed for installing or removing preformed ties or top ties on energized conductors, as it allows controlled rotation—something difficult to achieve with other tools. Recommended for work with top ties. Approx. weight: 0.10 kg (0.22 lb) | |
 | RC403-1071 | Preformed Tie Applicator Specifically designed for installing or removing preformed ties or ties on energized conductors, as it allows controlled rotation—something difficult to achieve with other tools. Approx. weight: 0.10 kg (0.22 lb) | |
 | FLV30755-1 | Insulator Clamp Primarily used to hold, guide, and maneuver the insulator string during installation or removal. Through the lifting eye, the clamp can be used to raise the string from the ground to the installation point or perform the reverse operation (removal from the work position down to the ground). Approx. weight: 1.00 kg (2.20 lb) | |
 | RC403-1416 | Tying Grip Hand-shaped, it acts like a clamp to handle wire or preformed ties during installation on the conductor. Approx. weight: 0.22 kg (0.49 lb) | |
 | RC403-0314 | Conductor Cleaning File Developed to clean the surface of energized conductors prior to installing connectors or grounding clamps, especially copper conductors with oxidation where cleaning by other methods is difficult. Approx. weight: 0.29 kg (0.64 lb) | |
 | RC403-1417 | Multi-Purpose Head Used in various interventions on energized installations, such as installing or removing blocks, nylon slings, switches, etc. Approx. weight: 0.24 kg (0.53 lb) | |
 | RM4455-2 | Pin Installer and Remover Allows the installation and removal of pins in insulator strings through its blade, which securely holds pin heads up to Ø 15 mm during handling. Approx. weight: 0.21 kg (0.46 lb) | |
 | RM4455-12 | Spring-Action Cotter Pin Extractor Spring-action tool that enables the removal of cotter pins from insulators in energized installations when the pin head is oriented toward the structure. Approx. weight: 0.17 kg (0.37 lb) | |
 | RM4455-5 | Guard Ring Clamp Allows handling of corona rings up to Ø 45 mm through its vise-type design, equipped with plastic-coated hooks. Maximum opening: 75 mm. Approx. weight: 0.78 kg (1.72 lb) | |
 | RM4455-13 | Spring-Action Disconnect Tool Spring-action tool that enables the opening of knife switches or fuses that are stuck or jammed. Approx. weight: 0.20 kg (0.44 lb) | |
 | RM4455-6 | Ratchet Wrench Designed to handle bolts and nuts in energized installations using interchangeable sockets. Equipped with a universal rotating screw at its end, it can be used in conjunction with universal sticks. Approx. weight: 0.69 kg (1.52 lb) | |
 | RM4455-15 | Pin Aligner Used to facilitate the insertion of pins and bolts into metal fittings and insulator strings when alignment between the respective holes is required. Approx. weight: 0.32 kg (0.71 lb) | |
 | RM4455-10 | Tool Adapter Developed to allow the installation of various tools through welded fittings, making them universal for multiple interventions on energized installations. Approx. weight: 0.12 kg (0.26 lb) | |
 | RM4455-17 | Double Hook Head Allows safe operations during wire tying, preventing the end of the wire loop from coming loose and contacting the crossarm. Approx. weight: 0.18 kg (0.40 lb) | |
 | RM4455-18 | Cotter Pin Installer Allows the installation of pins or fittings through its jaws, which hold them securely when they are out of the electrician’s reach. Approx. weight: 0.12 kg (0.26 lb) | |
 | FLV31479-2 | Pruning Saw Allows cutting tree branches near energized installations. Approx. weight: 0.36 kg (0.79 lb) | |
 | FLV31800-1T | Pruning Saw with Auxiliary Hooks Equipped with hooks at the ends to assist in removing cut branches. Approx. weight: 0.46 kg (1.02 lb) | |
 | RM4455-66 | Saw Handle This tool acts as a handle for the FLV31479-2 pruning saw in live-line (barehand/contact) work. Approx. weight: 0.20 kg (0.44 lb) | |
 | RM4455-19 | Auxiliary Cotter Pin Puller Assists in the uncoupling and coupling of cap-and-pin type insulators. The straight end allows displacing the cotter pin from the socket’s internal housing, while the curved end is used to push the cotter pin back into position. Approx. weight: 0.33 kg (0.73 lb) | |
 | RM4455-22 | Socket Support Hook Hook-shaped tool that allows positioning of the insulator socket during installation or removal of the cotter pin. Approx. weight: 0.34 kg (0.75 lb) | |
 | RM4455-28 | Flathead Screwdriver Allows installation and removal of slotted-head screws in energized installations. Approx. weight: 0.12 kg (0.26 lb) | |
 | RM4455-23 | Hacksaw Frame Allows cutting of components near energized conductors, even at unfavorable angles. Approx. weight: 0.42 kg (0.93 lb) | |
 | RM4455-36 | Auxiliary Turnbuckle Clamp Allows holding light components or conductors during interventions on energized installations. Features an opening range from 6 to 19 mm. The body edges are rounded to prevent damage to conductors. Approx. weight: 0.36 kg (0.79 lb) | |
 | RM4455-37 | Tool Adapter Allows coupling of various tools with secure fastening through a wing nut, making them universal for multiple interventions on energized installations. Approx. weight: 0.14 kg (0.31 lb) | |
 | RM4455-46 | Flexible Support for Hex Socket Allows fitting of standard 1/2” sockets for installing or removing bolts or nuts. Approx. weight: 0.42 kg (0.93 lb) | |
 | RM4455-38 | Inspection Mirror Allows inspection of parts of energized installations that are not directly visible. The angle of the concave mirror can be pre-adjusted, providing a better working position for the electrician. Approx. weight: 0.37 kg (0.82 lb) | |
 | RM4455-50 | Knife Allows cutting of objects or removal of insulation from conductors in energized installations. Approx. weight: 0.11 kg (0.24 lb) | |
 | RM4455-39 | Insulator Hook For handling and lifting insulator strings. Its articulation allows maintaining alignment with the insulator at all times. Also used as support during interventions on energized installations, such as installation of hot sticks or yokes. Approx. weight: 0.30 kg (0.66 lb) | |
 | RM4455-63 | “V” Conductor Cleaning Brush Equipped with steel bristles that provide excellent pressure around the conductor during cleaning. Features a universal fitting for coupling with a universal hot stick. Approx. weight: 0.17 kg (0.37 lb) | |
 | RM1889 | “V” Conductor Cleaning Brush Equipped with steel bristles that provide excellent pressure around the conductor during cleaning. Features a handle for manual use (provided it is used with rubber insulating gloves). Approx. weight: 0.36 kg (0.79 lb) | |
 | RM4455-40 | Fixed Blade for Tying Equipped with a blade inclined at 60° relative to the stick, allowing manipulation of tying wires. Its deep “V”-shaped grooves facilitate wire extraction, even in hard-to-reach areas. Approx. weight: 0.20 kg (0.44 lb) | |
 | RH4455-64 | Extension with Drip Guards This tool is designed for coupling to insulating sticks for use in emergency switching operations under rain conditions. Approx. weight: 1.10 kg (2.42 lb) | |
 | RM4455-67 | Insulator Clamp Allows holding the insulator during installation or removal. With a pre-adjusted angle via the wing nut, and through screw rotation, the fiber jaws are adjusted from 76 to 108 mm (3” to 4-1/4”). Approx. weight: 1.06 kg (2.34 lb) | |
 | RT403-1101 | Insulator Clamp Allows holding the insulator during installation or removal. With a pre-adjusted angle via the wing nut, and through screw rotation, the fiber jaws are adjusted from 57 to 89 mm (2 1/4” to 3-1/2”). Approx. weight: 1.06 kg (2.34 lb) | |
 | RM4455-72 | Conductor Gauge Measuring Tool Allows quick and accurate measurement of conductor sizes, including ACSR, solid copper, or stranded conductors, from 4 AWG Cu up to 4/0 ACSR. Approx. weight: 0.08 kg (0.18 lb) | |
 | RM4455-69 | Rotating Tying Hook Features a freely rotating hook for making and removing ties, with an eye at its ends. Approx. weight: 0.30 kg (0.66 lb) | |
 | RM4455-77 | Cartridge Extractor Equipped with a universal fitting, it is used to install, operate, or remove fuse switch cartridges from Ø 13 to 38 mm in energized installations by rotating the universal hot stick. The extractor angle can be pre-adjusted using the wing nut. Approx. weight: 0.97 kg (2.14 lb) | |
 | RM4455-78 | Cartridge Extractor Similar in application to model RM4455-77, this tool has an opening capacity from Ø 25 to 64 mm. Approx. weight: 1.0 kg (2.20 lb) | |
 | FLV03811-3 | Cartridge Extractor Used to install, operate, or remove fuse switch cartridges from Ø 30 to 90 mm in energized installations by rotating the universal hot stick. Approx. weight: 1.40 kg (3.09 lb) | |
 | RM4455-70 | Rotating Tying Blade Tool with a “V”-shaped steel blade that rotates freely on its axis. Used to remove ties without an eye at the end. Approx. weight: 0.26 kg (0.57 lb) | |
 | RM4455-71 | Pointed Disconnect Head Head used for operating cutout switches. Approx. weight: 0.09 kg (0.20 lb) | |
 | RC403-2270 | Aerosol Applicator For applying paints or lubricants on energized equipment, as well as insecticides on insect nests. Optional: CPR-30485 – Protective Cover for Aerosol Applicator. Approx. weight: 0.21 kg (0.46 lb) | |
 | RM4455-82 | Cotter Pin Installer and Extractor Specifically designed to install and remove cotter pins in insulator dead-end strings. Features grooves that guide the cotter pin during installation. Approx. weight: 0.09 kg (0.20 lb) | |
 | RM4455-79 | Spiral Hook Allows performing various tasks, such as: - opening yoke latches to release trunnions or the adjustable sleeve on the tensioning stick; - assisting in the installation of the yoke on the energized side; - installing and removing cable tensioners. Approx. weight: 0.18 kg (0.40 lb) | |
 | RM4455-84 | Universal Adapter Supplied with a wing screw (for coupling to the universal head), this device allows changing the installation angle of a tool. Approx. weight: 0.11 kg (0.24 lb) | |
 | RM4455-80 | Rope and Branch Hook Allows pushing/pulling tree branches away from the work area near energized installations or untangling ropes. Approx. weight: 0.15 kg (0.33 lb) | |
 | RM4455-85 | Hammer Allows applying force to equipment in energized installations to move or reposition them. Approx. weight: 0.42 kg (0.93 lb) | |
 | RM4455-86 | Auxiliary Clamp Allows the electrician to temporarily anchor the ends of cut conductors during maintenance, preventing them from remaining loose. Approx. weight: 0.13 kg (0.29 lb) | |
 | RM4455-88 | Open-End Wrench Functions as a fixed wrench for 3/4” and 5/8” bolts, preventing them from turning when the nut is operated with the ratcheting socket wrench RM4455-89 and the multi-angle sockets RC403-1085 and RC403-1085M. Approx. weight: 0.42 kg (0.93 lb) | |
 | RM4455-93 | Manual Tubular Conductor Brush Similar to model RM4455-92 (Ø 64 mm), used manually with the aid of insulating gloves to enhance operator safety. Approx. weight: 0.30 kg (0.66 lb) | |
 | RC403-0320 | Escova Tubular Manual para Condutor (Ø 64 mm externo), similar ao modelo RM4455-92, possui uma alça de aço com revestimento plástico para uma melhor empunhadura do eletricista, que deve utilizar luvas isolantes durante o seu manuseio. Peso aprox.: 0,22 kg (0,49 lb) | |
 | RC403-0450 | Manual Tubular Conductor Brush (Ø 76 mm outer) Similar to model RM4455-92, it features a steel handle with plastic coating for improved grip. Must be used with insulating gloves during handling. Approx. weight: 0.45 kg (0.99 lb) | |
 | RM4455-92 | Tubular Conductor Brush Semi-tubular design with Ø 64 mm outer diameter and a rotating head with universal fitting for coupling to a universal hot stick. Allows cleaning around the entire circumference of the energized conductor. Approx. weight: 0.53 kg (1.17 lb) | |
 | FLV16165-1 | Universal Extension This tool allows extending other universal tools in certain situations, especially in hard-to-reach areas. Approx. weight: 0.15 kg (0.33 lb) | |
 | RM4455-97 | “W” Clip Tool Allows installation of “W”-type cotter pins (commonly used in Europe and Japan) through its slot. Approx. weight: 0.22 kg (0.49 lb) | |
 | FLV16148-1 | Universal Hook Allows handling of objects up to Ø 64 mm. Approx. weight: 0.34 kg (0.75 lb) | |
 | RM4455-100 | Flexible Universal Adapter This tool allows rotation of another universal tool in series with it, even at an angle when coupled to a universal hot stick or operating stick. Approx. weight: 0.72 kg (1.59 lb) | |
 | FLV16159-1 | Rubber-Protected Hammer Allows striking equipment in energized installations to move or reposition them. Approx. weight: 0.40 kg (0.88 lb) | |
 | RM4455-102 | Pin Installer This tool allows installation of pins in insulator strings through its three jaws, which provide a firm grip. Approx. weight: 0.40 kg (0.88 lb) | |
 | FLV11042-1 | Croque-Type Head Commonly used by firefighters to break glass, roofs, etc., in order to clear access to areas such as buildings, houses, and warehouses after fires, reducing the risk of accidents. Approx. weight: 0.85 kg (1.87 lb) | |
 | RM4455-103 | Cotter Pin Installer This tool allows installation of cotter pins at an angle in insulator strings through its multi-fit device. Approx. weight: 0.26 kg (0.57 lb) | |
 | FLV29611-2 | Spacer Installation Head Tips made of steel to provide a certain flexibility, allowing the electrician to position them optimally during use. Coated in red plastisol to improve tool visibility from a distance. Approx. weight: 0.20 kg (0.44 lb) | |
 | RM4455-96 | Lever-Type Cotter Pin Puller Allows easy partial extraction of the cotter pin through its “petal”-shaped design, which, with a levering motion, smoothly extracts the cotter pin positioned perpendicular to the structure. Approx. weight: 0.28 kg (0.62 lb) | |
 | FLV32670-1 | Universal Adapter for Action Cameras Designed to mount action cameras and mobile phones on operating sticks for inspections in hard-to-reach areas. Approx. weight: 0.20 kg (0.44 lb) |
