Temporary Grounding
Hand Sticks, Maneuvering Sticks and Universal Tools
Protective and Insulating Rubber Covers
Restoration and Packaging Components
Ladders, Platforms and Insulated Scaffolding
Tools for Lifting Loads and Accessories
Traction, Locomotion and Support Tools
Equipment for Working to Potential
Test and Detection Instruments
Temporary Jumpers
Signaling Balls
Temporary GroundingHand Sticks, Maneuvering Sticks and Universal ToolsProtective and Insulating Rubber CoversRestoration and Packaging ComponentsLadders, Platforms and Insulated ScaffoldingTools for Lifting Loads and AccessoriesTraction, Locomotion and Support ToolsEquipment for Working to PotentialTest and Detection InstrumentsTemporary JumpersSignaling Balls
This set of tools allows temporary grounding assemblies to be lifted and installed on the busbars of
extra-high-voltage substations, directly from the ground, at a height of up to 8m.
The tip sections (ATR01875-1 and VMR/S-SP) must be coupled to separate switchgear rods, with lengths compatible with the height of the substation busbar.
The ATR01875-1 section must be installed on the busbar using the support hook. The VMR/S-SP section will hoist the clamp and earthing cable.
| Referências | Característica | |||
|---|---|---|---|---|
 | ATR23989-1 | Conjunto composto por: 01 pç Elemento com gancho de sustentação e carretilha (ATR01875-1); 01 pç Elemento ponta com cabeçote universal e colarinho articulável (VMR/S-SP); 20 m Corda de polipropileno de Ø 3/8” (RM1895-2) |  |
