Auxiliary crosshead

Auxiliary crosshead

Equipment used in construction or maintenance to handle conductors when replacing crossarms, insulators or poles in short spans of medium-voltage overhead networks up to 15 kV phase/phase.

For models RH4862-6, RH4862-8 and RH4862-51, it is necessary to add two saddles (FLV4740-5W) to install the auxiliary cross mast to the pole. The saddles must be purchased separately.

It has a load capacity of 272 daN (600 lb) with all four conductors in balance and 68 daN (150 lb) on each clip in the unbalanced condition.

| RH4863-10
Constructed with a special RITZGLAS® mast
,
consisting of two Ø 64 mm support poles, fixed to a saddle with tilt adjustment through 7 holes, spaced at 15 degrees, for coupling to square or rectangular booms adjustable for dimensions from 127 x 178 mm to 254 x 254 mm of the aerial basket or similar equipment.

The maximum vertical load capacity balanced on the three crosshead cleats is 454 daN (1000 lb).

Designed to withstand a maximum unbalanced load of 90 daN (200 lb) on each of the cleats. Each
roller lifting cleat (RC400-0268) used on this auxiliary crosshead has a lateral load capacity of 45 daN (100 lb). It is therefore essential that this auxiliary crosshead is only fitted to equipment with a load lifting capacity of more than 907 daN (2000 lb).

Approx. weight: 48 kg (105.8 lb)