Temporary Grounding
Hand Sticks, Maneuvering Sticks and Universal Tools
Protective and Insulating Rubber Covers
Restoration and Packaging Components
Ladders, Platforms and Insulated Scaffolding
Tools for Lifting Loads and Accessories
Traction, Locomotion and Support Tools
Equipment for Working to Potential
Test and Detection Instruments
Temporary Jumpers
Signaling Balls
Temporary GroundingHand Sticks, Maneuvering Sticks and Universal ToolsProtective and Insulating Rubber CoversRestoration and Packaging ComponentsLadders, Platforms and Insulated ScaffoldingTools for Lifting Loads and AccessoriesTraction, Locomotion and Support ToolsEquipment for Working to PotentialTest and Detection InstrumentsTemporary JumpersSignaling Balls
The contact AC voltage detector is designed to detect the presence of voltage in alternating current installations in transmission and distribution lines, substations and cubicles with phase-to-phase voltage and bare conductors.
Its advanced electronic circuitry guarantees a safe and precise response, providing light and sound indications to ensure an effective response.
In compliance with the requirements of the Regulatory Standard for Safety in Electrical Installations and Services NR-10 (item 10.5.1 – C – Verification of the absence of voltage), we have models tested in accordance with ABNT NBR IEC 61243-1:2020 and the international standard IEC 61243:2021, specially designed for use with voltages
higher than 1 kV AC.
Find out more in our article: Capacitive Contact Voltage Detector: The Importance of IEC Standard 61243-1:2021 for Safety and Reliability – Maintenance and Safety Equipment for the Electrical Sector – Ritz Brasil
The instruments are designed with an external compartment for changing the battery, providing safety during the replacement process and guaranteeing protection of the electronic board against possible damage from static electricity. They also feature a high degree of protection and sealing against variations in temperature and humidity, resistance to impact, vibration and improved shielding.
References: CT 0.05-1 | CT 0.07-1 | CT 3.8-36
| References | Characteristics | ||
|---|---|---|---|
 | CT 0,05-1 | ||
 | CT 0,07-1 |
Operating frequency: 60 Hz
| References | Characteristics | ||
|---|---|---|---|
 | CT 5-15 | ||
 | CT 3,8-36 | ||
 | CT 12-36 | ||
 | CT 10-40 | ||
 | CT 60-180 | ||
 | CT 60-240 | ||
 | CT 225-450 | ||
 | CT 180-540* |
Operating frequency: 50-60 Hz
*Meets the requirements of standard NBR IEC61243-1 2020, except for the test called influence of the phase opposition interference field.
