Description
Temporary fuse switch
| References | Feature | ||
|---|---|---|---|
 | RC600-1895 | Standard type | |
 | RC600-1944 | Pivot lever type |
Temporary fuse switch
Temporary fuse switch
It is used to maintain protection during interventions on conventional fuse switches in distribution networks, and is a component of the temporary jumper for transformer bushings.
This switch is installed and removed using a switch pole.
The bronze pin at the lower end is for connecting the temporary jumper. The Ø 32 mm RITZGLAS® pipe with two drip pans ensures insulation.
NOTES
– The fuse links are not supplied with the fuse switch and must be purchased from a third party, with a maximum capacity of 100 A.
– Opening this switch under load requires the use of the loadbuster device.
– The temporary lever-pivot type fuse switch allows the switch to be closed from the opposite side to the fuse holder, using an operating rod.
