Temporary Grounding
Hand Sticks, Maneuvering Sticks and Universal Tools
Protective and Insulating Rubber Covers
Restoration and Packaging Components
Ladders, Platforms and Insulated Scaffolding
Tools for Lifting Loads and Accessories
Traction, Locomotion and Support Tools
Equipment for Working to Potential
Test and Detection Instruments
Temporary Jumpers
Signaling Balls
Temporary GroundingHand Sticks, Maneuvering Sticks and Universal ToolsProtective and Insulating Rubber CoversRestoration and Packaging ComponentsLadders, Platforms and Insulated ScaffoldingTools for Lifting Loads and AccessoriesTraction, Locomotion and Support ToolsEquipment for Working to PotentialTest and Detection InstrumentsTemporary JumpersSignaling Balls
The use of this tool is common practice when working on energized medium-voltage installations to replace and/or repair components installed between the transformer bushings and the mains, which can be carried out using the contact or remote method.
Available in two mounting versions (both built with 14.6 kV protected cables – 2 AWG gauge).
Rated Current Capacity: 100A
| References | Feature | ||
|---|---|---|---|
 | FLV11179-2 | Clamp for transformer bushing | |
 | RG3622-1 | Twist clamp | |
 | R3751 | Type I insulated cable for 15 kV, 2 AWG | |
 | FLV05784-1 | Protection device for jumper | |
 | RS1600-7 | Isolated support |
Approx. weight: 5.80 kg (12.79 lb)
| References | Feature | ||
|---|---|---|---|
| FLV11179-2 | Clamp for transformer bushing | |
 | RG3622-1 | Twist clamp | |
| R3751 | Type I insulated cable for 15 kV, 2 AWG | |
 | RC600-1895 | Fuse switch |
Approx. weight: 8.10 kg (17.86 lb)
