CROSSARM COVERS
Its main application is to prevent the contact of cable ties with the crossarm in pin insulator or post insulator replacement operations.
They can also be used to hold the temporary jumper or conductor over the crossarm. Conductors must be protected with an appropriate covers.
Three models are available, one for crossarms with pin insulator and others for crossarms with post insulator.
| Catalog Reference | Description | Length (mm) | Approx. Weight | |
| kg | lb | |||
| RM4933 | With pin insulators | 610 | 1.45 | 3.20 |
| COB11173-1 | With post insulator | 570 | 1.50 | 3.31 |
| COB11173-2 | Short-type with post insulator | 430 | 1.10 | 2.43 |
| Rated voltage 36.6 kV (phase/phase) | ||||
Crossarm End Covers
It is used to protect crossarm ends against accidental contact with the cable tie during mounting or removal.
With the rubber glove method this cover also helps to prevent the electrician from contacting the earth potential.
The RC406-0102 can be used on crossarms with pin or post insulators as it has a bolt groove for double crossarm mounting.
| Cat. No. | Description | Approx. Weight | |
| kg | lb | ||
| RC406-0102 | Cover-Up for crossarm ends | 1.25 | 2.75 |
| COB14780-1 | Crossarm end cover | 0.71 | 1.57 |
| COB10765-1 | Cover-up for Knife-Switch Carcass | 0.68 | 1.50 |
| Rated voltage 36.6 kV (phase/phase) | |||